Miniature Hepa Dust Extractor is Suitable for portable car maintenance industry, can effectively remove the fine dust particles after polishing the car.Because of its small size, so it's easier to move.
Miniature Hepa Dust Extractor is Suitable for portable car maintenance industry, can effectively remove the fine dust particles after polishing the car.Because of its small size, so it's easier to move.
Remove the old paint coating of Miniature Hepa dust extractor: use high-power double-action eccentric mill, operating points: ensure that the mill pallet is always within the scope of damage, the mill pallet and Miniature Hepa Dust Extractor surface into a 5-10 degree Angle, to facilitate the accurate removal of old paint film. Fine grinding of atomic ash: use the Miniature Hepa Dust Extractor hand plane (hand push plate) operation key points: the hand plane corrects the contour line, the hand plane and the direction of movement into an Angle of 30 degrees.Pay attention to the condition of the toner. The raised ones are ground flat and the sunken ones still have black toner.The position relation between grinding point and standard profile is judged from different directions.Sandpaper: P120,P180,(optional P240) use toner more than once to correct the profile.Remove the old paint coating: use high-power double-action eccentric mill, operating points: ensure that the mill pallet is always within the scope of damage, the mill pallet and the dust extractor surface into a 5-10 degree Angle, to facilitate the accurate removal of old paint film.When using fine sanded cotton for wet grinding, vacuum isolation pad must be used to close the vacuum vacuum bucket.
Emergency treatment in the painting process: use sponge manual dry sand, manual Miniature Hepa Dust Extractor defects operating points: in the paint flash drying found defects, use dry abrasive paper contact paint defects, along the contour shape, light grinding.Grind with the center of the sandpaper, without using the edges.Check often, defect removal can be.Sand paper: P800(or P1000) note: must be new sand paper clean!
BonnewTools is a brand that belong to NER GROUP CO.,LIMITED who is a venture partner in Hongkong and China. BonnewTools is mainly in business of Automotive repair tools for both power tools, hardware tools and air tools. Such as dust extraction systems , abrasives, Clamps, Chains & Hooks, air pumps etc.
Bonnewtools brand Auto Body Repair Tools and accessories, Automotive pulling clamp, mobile dust extractor, , Frame Straightening Clamp ,collision pulling clamps, self tightening clamp, Mo-Clamp Clamps, 360 Degree Narrow Clamp With Multi-Pull Ring etc.
We believe that we can cooperate with you on this business and please contact us if you are interested.
Our website: https://www.bonnewtools.com/
Warm Regards,
NER GROUP CO.,LIMITED
Tel:+86-535-6330966
http://www.bonnewtools.com/
Viber/Line/Whatsapp/Wechat: 008613022734531
E-mail:
Address:No.5 Wanshoushan Road, Yantai, Shandong Province, China (264006)
