Portable cyclone dust collector is a convenient device that can make the dust particles fall into the dust bucket by virtue of gravity. Each component of the cyclone dust collector has a certain size proportion. The change of each proportion relation can affect the efficiency and pressure loss of the cyclone dust collector, among which the diameter of the dust remover, the size of the air inlet and the diameter of the exhaust pipe are the main influencing factors. It should be noted in use that when a certain limit is exceeded, favorable factors can also be converted into unfavorable factors. In addition, some factors are beneficial to the improvement of dust removal efficiency, but will increase the pressure loss, so the adjustment of all factors must be taken into account.
Cyclone dust collector began to use in 1885, has developed into a variety of forms. According to the airflow entry mode, it can be divided into tangential entry type and axial entry type. Under the same pressure loss, the latter can deal with about three times as much gas as the former, and the flow is evenly distributed.
Cyclone dust collectoris composed of intake pipe, exhaust pipe, cylinder body, cone and dust bucket. Cyclone dust collector has simple structure, easy to manufacture, installation and maintenance management, equipment investment and operating costs are low, has been widely used to separate solid and liquid particles from the air stream, or solid particles from the liquid separation. Under normal operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times of the gravity force, so the efficiency of the cyclone dust collector is significantly higher than that of the gravity settling chamber. Based on this principle, a cyclone dust collector device with a dust removal efficiency of over 90% has been successfully developed. In the mechanical dust remover, the cyclone dust remover is one of the most efficient. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove more than 5 m of particles, parallel multi-tube cyclone dust collector device to 3 m of particles also has a dust removal efficiency of 80 ~ 85%. Selects the high temperature resistant, resistant to abrasion and corrosion of cyclone in the production of special metal or ceramic material structure, can be in temperature as high as 1000 ℃, pressure of 500 x 105 pa under the conditions of operation. Considering the technical and economic aspects, the control range of pressure loss of cyclone dust collector is generally 500 ~ 2000Pa. Therefore, it belongs to the medium effect dust remover, and can be used for high temperature flue gas purification, is a kind of widely used dust remover, mostly used in boiler flue gas dust removal, multi-stage dust removal and pre-dust removal. Its main disadvantage is the low removal efficiency of fine dust particles (<5 m).
BonnewTools is a brand that belong to NER GROUP CO.,LIMITED who is a venture partner in Hongkong and China. BonnewTools is mainly in business of Automotive repair tools for both power tools, hardware tools and air tools. Such as dust extraction systems , abrasives, Clamps, Chains & Hooks, air pumps etc.
Bonnewtools brand Auto Body Repair Tools and accessories, Automotive pulling clamp, mobile dust extractor,Frame Straightening Clamp ,collision pulling clamps, self tightening clamp, Mo-Clamp Clamps, 360 Degree Narrow Clamp With Multi-Pull Ring etc.
We believe that we can cooperate with you on this business and please contact us if you are interested.
Our website: https://www.bonnewtools.com/
Warm Regards,
NER GROUP CO.,LIMITED
Tel:+86-535-6330966
http://www.bonnewtools.com/
Viber/Line/Whatsapp/Wechat: 008613022734531
E-mail:
